Canning Jar Air Freshener

Another easy-peasy project that has a purpose in addition to being decorative!

What you'll need for this project:

• 1 pint-sized (16 oz.) canning jar or jar of your choice
• Chalk paint - I used Folk Art in Patina
• Clear wax
• 1 hydrangea blossom or 3 Dollar Tree hydrangea stems
• Floral tape, as needed, for hydrangea stems
• Paint brush
• Wire cutters
• Medium to Coarse sandpaper
• 1 bag Sure Scent beads

   

I had purchased hydrangea stems from Dollar Tree online with the intent of holding a crafting class at our park. Then the virus hit and the class had to be cancelled. Since ordering online at Dollar Tree requires you to place bulk orders, I had a ton of these stems on hand. To make them look like actual hydrangea blooms instead of nondescript random white flowers, I cut the flower stems from the main stem of 3 of them, then bundled the individual stems together with floral tape.

Ready? Here we go!

STEP 1 - CLEAN & PAINT JAR
Wash and dry jar thoroughly. Apply 3 coats of paint, allowing to dry between coats. Finish off with a coat of wax. The wax acts as a sealant and provides a soft sheen. Allow to dry for 24 hours, then buff with a soft cloth.

STEP 2 - DISTRESS
Using sandpaper, go over all raised edges to distress.

STEP 3 - PREPARE STEMS
If you're also using Dollar Tree stems, assemble as described above. If you have purchased a bloom, simply cut the stem down to fit the jar.

STEP 4 - ADD SCENT BEADS
I suggest doing this over a sink to prevent the 'juice' from spilling onto an unwanted surface. Open the bag and pour the beads into the jar. Insert the hydrangea.

DONE!
Place wherever you need a breath of fresh air!

PROJECT COST (minus paint supplies & tools)
Jar: Free - already had
Hydrangea Stems: $3
Scent Beads: $1
Total cost of project: $4

BUYING GUIDE
All items were purchased at Dollar Tree.

Note: Sure Scent beads come in either bags or jars. If the bags aren't available at your local Dollar Tree, I'd recommend picking up 2 of the jars as they don't contain as many scent beads as the bags do.

Two Americas

Best video yet on the differences between progressives and conservatives.

I Snuck a Massage

Well, 'snuck' is an exaggeration. I was driving down Florida St. and noticed a banner announcing chiropractic, acupuncture and massage therapies. Since the place I normally go to was still closed and busy making useless masks, (because anyone with half a neuron knows you can catch the virus through your eyes), I jotted down the phone number and betrayed Hands of Mercy.

I was a bit disappointed with the massage, (she needs to go back to school and learn how to massage heads and feet), but as I was lying there, I recalled that chiropractic treatments cured me of migraines several years ago and decided to book an appointment for my back on my way out. It definitely couldn't hurt and I'm sick and tired of the back and leg pain. Considering I'm not getting anywhere with my doctor - who just prescribes 600mg ibuprofen that doesn't do diddly squat - I certainly couldn't get any worse.

I've had two adjustments so far and I've experienced a little bit of progress. I can stand / walk a teeny bit longer than usual, so I'm hopeful. He developed a treatment plan, which I've never had before with any chiropractor I've seen, so that's encouraging as well. I'm all out of whack from my neck to my lower back so he's recommending 2 adjustments per week for 6 weeks followed by maintenance visits after. I'm game. I'll let you know how it goes from here.

Beaded Wreath

Click to enlarge

I found this wreath on Pinterest and really liked it because it was different from the run-of-the-mill floral and mesh wreaths. This was my inspiration picture:

Looked easy enough!

Here's what you'll need for this project:

• 12" metal ring (Joann's)
• 1" / 25mm wood beads (Amazon)
• Assorted greenery and focus flowers (I used Lamb's Ear from Walmart; Pussy Willows and Magnolias from Michaels)
• Hot glue
• E6000 glue
• Small bolt cutters
• Wire cutters

Optional for Leather Hanger (Joann's or Hobby Lobby)

• Leather strap
• Leather hole punch
• Medium Nickel Rivets
• Pliers

   

 

 

I first purchased my beads at Michaels, but afterward found them on Amazon for a whole lot less! You can find the stained beads here and the natural beads here. For a 12" ring, you'll need about 45 beads. I used the stained beads as I thought the natural beads would look a bit washed out when hung against a lighter background.

The metal ring is about 5/16" thick, so you'll need bolt cutters to cut the ring apart in order to slide the beads on. I had to purchase bolt cutters and found that the 14" cutters worked just fine. Home Depot has them for varying prices starting around $20 and going on up. That said, if there's a man in your life, you can always sneak into his tool bin and abscond with them. Sure, you can ask, but it's more fun to sneak. If you don't have a man in your life, ask a neighbor or go buy your own.

This is a slightly pricey project as I've made it, but you can save some bucks by purchasing some of your items elsewhere. For instance, check out the Dollar Tree for flowers and greenery. You can save quite a bit just there. I wanted magnolias and they just didn't have them there, so I had to get those at a craft store. Additionally, use those coupons even if you have to make multiple trips.

The Hanger: I had a leather strap on hand that I had purchased for another project. You can save some bucks by hitting the thrift store and buying a man's plain leather belt or if you have an old leather purse, cut a strap from it. It will be a lot cheaper than paying $12.99 for the strap at the craft store. Alternatively, you can use leather lacing to make a loop hanger or simply hang it without one. Up to you. I also had a rotary leather punch, but again, you can save some bucks by buying a single punch if you don't think you'll have a need for multiple hole sizes down the road. Single punches can be purchased online at Tandy Leather. Just add a rubber mallet and a scrap block of wood to the tools needed.

Gluing Tip: This wreath can be made using only hot glue if you plan to hang it inside. But if you live in a hot climate, you shouldn't hang the wreath outside as the glue will likely melt in the summertime. If you want to hang it outside, here's a tip:

Since E6000 takes a while to set, make your wreath using hot glue. When done, flip the wreath over and liberally apply E6000 to all contact points, making sure you're not using so much glue that it seeps to the front. Let set overnight and you're good!

OK - let's make a wreath!

STEP 1 - PREPARE THE METAL RING

Find the joint and cut the ring using your bolt cutters. Now sneak back to the tool bin and replace them. He'll never know!

STEP 2 - ADD BEADS

Slide the beads onto the ring until full. If you end up with a stub on the ring that isn't long enough for another bead, apply some hot glue to the ring, slide on another bead, then glue the beginning and ending beads together.

STEP 3 - ARRANGE AND GLUE GREENERY

Cut flowers from main stem. Glue to wreath.

Cut stems of Lamb's Ear from the main stem. Arrange, trimming as needed, Glue in place.

Cut stems of Pussy Willows. Arrange, again trimming as needed. Glue in place.

STEP 4 - MAKE AND ATTACH THE STRAP HANGER

Fold leather strap over beads allowing a length to extend beyond the wreath. Mark for cutting. Remove from wreath and fold again, making sure the front strip extends past the back strip a bit (so the edges won't be even). Using a pen, mark for hole placement. You'll need one hole on the front of the hanger and two holes in the back. The top hole in the back will be the hole used for hanging.

Once the holes are punched, wrap around the beads and insert the rivet. Press together until you feel it 'snap'. Cover the rivet - both front and back - with some heavy fabric or paper towel folded a few times so it's thick. Press rivet together with the pliers to set. You don't need to apply a lot of pressure to set, so use a light to medium touch. If you press too hard, you can damage the rivet and it won't look very good.

Now find the perfect place to hang your beautiful wreath!

TOTAL PROJECT COST (without coupons)

Metal Ring: $2.99

Beads: Stained: $18.39 Natural: $15.99

Lamb's Ear: $1.99

Magnolia Bush: $5.99 (on sale - normally $14.99)

Pussy Willow Stem: $6.99

Total Cost: $36.35

Hanger (without coupons)

Leather Strap: $12.99

Rivets: $6.99

Total Cost: $19.98

Grand Total: $56.33 with stained beads or  $53.93 if using natural beads. Again, total cost does not reflect the use of coupons or less expensive alternatives for supplies. Also, you will have most materials left over that will allow you to make more than one which will pretty much halve the cost.

Coronavirus, C-19, WuFlu...

Are we freaking having fun yet?

The situation around the country is becoming ludicrous, to say the least. Little Hitlers have popped up everywhere, and of course, that includes here in the good ole Republik of Kalifornia. But what else would you expect of Nancy Pelosi's nephew anyway, huh?

And don't go getting excited about Elon Musk. He has always described himself as a socialist. And yes, he did tweet about taking a Red Pill, but the red pill he's referring to is the one from the Matrix. One can argue that they're the same, but one is a fantasy and the other is not. He also ended that tweet with the [social media]-recognized symbol for socialism. He's just a die-hard socialist that had one taste of what socialism truly means. He's still living the Utopia dream.

IT'S NOT ABOUT THE VIRUS
So I can go into a Wal-Mart or a Target, be exposed to who knows who with who knows what, but I can't go to church or out to breakfast. Explain to me how the exposure to people in Wal-Mart is different than exposure to people in a restaurant or at church? There is evil afoot and it's not because of the virus.

When we let out known child molesters and five policeman gang up on a mother and bring her to the ground for wearing her mask incorrectly - in front of her toddler, I might add - you know we're not dealing with sane people with sane policies.

When it has been proven that the virus dies within five minutes of being exposed to sunlight, but they're filling up skate parks with sand and arresting a lone surfer, you know it's not about the virus.

When they form teams of people to go door-to-door to test the population to find out if they're infected, and then removing people from their homes because they only have one bathroom, you know it's not about the virus.

When you have governors threatening to extend the lockdown if you do X, Y or Z, you know it's not about the virus.

When other states are adjusting their death counts to reflect 'those that died from COVID" vs. 'those that died with COVID' and the C-19 death counts are reduced by the hundreds, you know it's not about the virus.

And on and on it goes...

We're shutting down the economy over a virus that, as it stands today, has a 99.5% recovery rate. Yet as we learn new and good things about the situation, we have governors extending lockdowns until August. Why?

NEVER LET A GOOD CRISIS GO TO WASTE.

The globalists, which include virtually all far-left Democrats, some moderates and some greedy Republicans, are desperate to usher in the New World [Moral] Order. They've been working on it since the end of WWII. Don't believe me? Here's a map drawn up by the U.N. that demonstrates their goal.

Click to enlarge

Agenda 21, rewritten to become Agenda 2030, is the documented plan. Again, don't take my word for it, go to the UN website. The year 2030 is their goal for achieving their utopia. Now you know why AOC kept going on about 'we've only got 10 years left!". 

Now the globalists weren't making much headway in the U.S. where open borders, gun control and climate change laws were concerned. At least not fast enough. THEN, interestingly enough, and one month BEFORE the virus was known to have hit the U.S., Bill Gates and company sponsored a war-gaming event with all of the same players as for climate change. All progressive, all globalists. The war game was to determine what to do in the event of a global pandemic. Coincidence? It's so very hard to think that it's not. This war game was called Event 201. Look it up. This is where they decided on who the 'authoritative truths' would come from. Well, lookie here. It's WHO. You know, the UN group that originally told us that the virus could not be transmitted from human-to-human at the onset? The same group that said masks were ineffective, then changed their story a couple of months later? Who spread Chinese propaganda that the US Marines were responsible for bringing the virus to China? Yep, great puppets they'll make against that rebellious country that won't give up their guns and give in to the climate change B.S. So what would work? Well, crushing the economy will work. Keeping people ginned up with fear is also helpful. Scared people will let you do most anything. Hungry people, even more.

And then there's the whole Bill Gates vaccination that's primary purpose is to track people, with anything that's actually beneficial to the person being the secondary concern. The FDA has put a hold on it. For now.

Google and Apple are also promising to deactivate their tracking phone programs once the crisis is over. Apple has always been better about privacy than Google ever was, but since Google developed the app that China uses to track all of their citizens for 'social compliance', I don't trust them one whit. Apple either at this point, and if you know me at all, you know that was hard for me to say.

So here we are. When the virus thing is ramping down, the Hitlers are ramping up. There's a reason for it. Think what you will. I trust no one at this point.

Coming up next... Gay frogs falling out of the sky.

To My Ravelry Friends

It appears that Ravelry has jumped on the idiotic bandwagon and has become political. They are now banning any posts related to Trump and his administration due to their 'undeniable white supremacy'.

Now where did they get that idea?

Well, if you're a Ravelry user and click on the link at the bottom of their policy, it will take you to a similar policy set up by an RPGer. This RPGer is a known troll and Trump hater. Since that's as far as Ravelry has appeared to have taken their investigation, it is lacking at best.

Some of you know me and know my politics. I have never felt it appropriate to take those politics anywhere outside of my personal blog and [now defunct] Facebook page. Why? Because that's Rule #1 - never discuss politics or religion with acquaintances or strangers. Politics has no place outside of close like-minded friends or the family dinner table. Secondly, I'd never support a white supremacist. Period.

Ravelry did not learn Rule #1. They have now alienated approximately half of their membership by calling them all white supremacists. And they've said nothing about leaving patterns or posts up that insult Trump in the most vulgar language.

Tolerance is not supporting those you agree with. That's easy and takes no effort. Tolerance is supporting those you don't agree with. Otherwise, you're either simply in agreement and / or not being tolerant.

There is zero evidence to support their claims of white supremacy. Does Trump make it harder for those who support him when he opens his face? Sometimes, most certainly. He's a brash New Yorker and I take him as that. And those that do the same are able to read between the lines.

So with that said, I'm leaving Ravelry. I'll be leaving my patterns up for one week, then they're gone. Too bad they had to go and get stupid.

https://www.ravelry.com/stores/julieann-thornton-designs

In the meantime, I'm going to consider if setting up a crochet group of my own is something I want to invest time in again. Should I decide to go there, I'll post with details.

Yarn on!

Click to enlarge for reading

Churchill

We Are All Catholic

Pope Francis recently made the statement that, "We are all Catholic and it's time the Protestants come back since the reformation". Ummm... No, we're not all Catholic and the Reformation was for a plethora of very good reasons. Good try at ecumenicism though. Go back to focusing on merging the Catholic Church with Islam.

Rather than me going on for pages and pages, this video provides the history of the churches and how the Catholic Church factors into prophecy.

Muslims demand Nike recall shoes 'with Allah on soles'

Air Max logo resembling Arabic seen as 'blasphemous'

Nike has committed “blasphemy” with its Air Max 270 shoe, charges a petition launched online by a Muslim that was signed by more than 6,000 people within hours.

The sole of the athletic shoe features the words Air Max in a stylized script that the Muslim protesters believe resembles the Arabic script for “Allah,” the Daily Mail of London reported.

Nike has allowed Allah’s name to be “trampled, kicked and become soiled with mud or even filth,” the petition states.

In Islamic culture, the Daily Mail points out, showing the sole of one’s shoe is a sign of disrespect.

“It is outrageous and appalling of Nike to allow the name of God on a shoe. This is disrespectful and extremely offensive to Muslim’s and insulting to Islam,” wrote Saiqa Noreen

She wrote that Islam “teaches compassion, kindness and fairness towards all.”

“We urge Nike to recall this blasphemous and offensive shoe and all products with the design logo resembling the word Allah from worldwide sales immediately.

“We also request stricter scrutiny of products before they enter the market. I urge all Muslim’s and everyone who respects the freedom of religion to sign this petition.”

In 1997, Nike was forced to recall thousands of pairs of Air Bakin’ sneakers, because the word “Air” written on the heel could be read as Allah in Arabic script.

Jihad Watch Director Robert Spencer commented on the outrage.

“Let’s hope that Nike does not bow to the Sharia as it has before, and as have so many others,” he wrote.

“This ridiculousness will have no end until non-Muslims in the West wake up and realize that they are free and that they are not under the Sharia, and too bad if Muslims are offended,” he said.

“Hindus, Christians, Jews, Buddhists, Zoroastrians, etc., etc., all get offended, too, without demanding special treatment. All are equal in free societies that allow for pluralism — and offense.”

Spencer noted that in recent weeks, Muslims launched a petition for a boycott of the British retailer Marks and Spencer over toilet paper they claimed featured the name of Allah. Then CAIR, a U.S. group linked to Hamas, successfully pressed Amazon to stop sale of doormats with Quranic verses. There also was outrage over Quranic verses on toilet seat covers.

Link to Original Article

Early Spring!

Yay!